Asbestos and Air Conditioning Ductwork Safety Alert
Take the Asbestos Removal Course Melbourne to Safely Remove Asbestos
Asbestos-containing millboard was once widely used in the construction industry due to its flame-resistant properties, and commonly used to line compartments containing heat or spark-producing electrical equipment. In particular, asbestos-containing millboard surrounded reheating banks or coils throughout the ductwork of air conditioning units. An Asbestos removal licence is obtainable by completing the Asbestos Removal Course Melbourne.
While there have been successful undertakings to replace air conditioning systems and the asbestos containing millboard over the years, many systems still remain, often unknown to their owners. As older buildings undergo retrofitting, many elements of mechanical plant are being decommissioned and removed. Unfortunately, this exposes a variety of contractors and sub-contractors, as well as younger workers who are not familiar with older systems, to potential hidden dangers. By taking the Asbestos Removal Course Melbourne you can dramatically reduce the risk to everyone involved in the removal and transport of asbestos.
Factors/Risks to Consider:
Asbestos-containing materials, such as millboard, that are intact and in good condition are not hazardous to building occupants under normal conditions. However, asbestos becomes a health risk when fibres are released into the air and inhaled. The length and frequency of exposure may impact the risk of developing asbestos-related diseases such as asbestosis, mesothelioma and lung cancer.
The main concern with old systems is to avoid accidental or inappropriate disturbance without correct safety procedures in place.
Action Required: Register for the Asbestos Removal Course Melbourne
If refurbishment or replacement of the heater bank ductwork for a building has not taken place in the past 30 years, SafeWork recommends the following action should be taken:
− check the building’s asbestos register for a note that millboard lining in the heater banks has been identified or removed;
− if not identified or removed, add the issue to the building asbestos register for future workers; or
− if accessible, label the ductwork adjacent to the heater banks in line with the requirements of the WHS Regulations for labeling asbestos-containing materials (regulation 424).
Getting Started: Sign up for Asbestos Removal Course Melbourne
Understanding how to Remove and Transport Asbestos safely is another critical part of your training
If you are disposing of asbestos you first need to establish the requirements of the specific waste disposal site, otherwise the waste may not be accepted.
Asbestos waste disposal must be carried out in a manner that prevents the release of airborne asbestos fibres, which means ensuring:
– asbestos waste is securely packaged
– the waste is secure during transport
– the method of unloading the waste is safe.
Once the Asbestos has be safely removed ,carefully packaged and ready for transport, you can only dispose of asbestos at a site licensed by EPA Victoria to accept waste asbestos. You should contact the disposal site operator to check whether the site is appropriately licensed to accept the waste. At the waste disposal site, licence conditions require waste asbestos to be handled and covered in such a manner that no dust is generated.
Asbestos Removal Course Melbourne is the key to landing a job on construction and demolition projects. Make yourself a more marketable candidate by learning these highly sort after skills. Call COVE Training on (03) 8773 9000 to learn more or enquire about our on-demand course delivery options. (RTO) No. 21386